Rapid Digestor Fume Removal System Model 23500-20 – Designed for 20 Place Block Digestors Model 23500-25 – Designed for Rapid Digestor 25 P
REPLACEMENT PARTS 10 REPLACEMENT PARTS LIST Models 23500-20 and 23500-25 Part Number Description 13575 Water Jet Eductor 16223 2' Drain Ho
DRAWINGS 11 Figure 1
DRAWINGS 12 Figure 2
DRAWINGS 13 MODEL NO. 23500-20 (For 20 Place digestion Systems) Figure 3
DRAWINGS 14 Figure 4
DRAWINGS 15 Figure 5
WARRANTY 16 We are committed to providing our customers with quality equipment and service after the sale. Part of this objective involves keeping yo
SHIPPING CLAIM 17 If a shipment is received in visibly damaged condition, be certain to make a notation on the delivering carrier’s receipt and have h
CONTACTING LABCONCO 18 If you have any questions that are not addressed in this manual, or if you need technical assistance, please contact Labconco
TABLE OF CONTENTS Preface ...
PREFACE 4 Thank you for displaying confidence in us by selecting a Labconco Rapid Digestor Fume Removal System. Our design engineers, assemblers a
INTRODUCTION 5 General Description The Labconco Fume Removal Systems are designed to remove corrosive fumes produced when performing Kjeldahl digesti
INTRODUCTION 6 Specifications 1. Water Requirements Supply tap water Demand 2-3 gallons/minute Connections for eductor 1/2" male (A1/
INSTALLATION 7 Installation Unpacking Use caution when unpacking the digestor and accessories to avoid damage. The exhaust housing and manifold a
OPERATION 8 Operation Place exhaust manifold on top of digestion tubes immediately after placing tubes in digestor. Refer to Digestor instruction ma
MAINTENANCE 9 Maintenance Periodic cleaning of the exhaust manifold is necessary for efficient operation of the system. The glass manifold can be dis
Comments to this Manuals