Labconco 10-Port Manifold User Manual download pdf

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 1 of 5

LABCONCO CORPORATION 8811 Prospect Ave, Kansas City, MO 64132

(816) 333-8811, Fax (816) 363-0130, (800) 821-5525

Labconco 10 Port Manifold 7522400

Introduction-

Manifolds are ideal for Lyophilizing in serum bottles, ampules or small flasks. They come

complete with Neoprene valves to which the sample container attaches. The 10 Port Manifold

may be used in conjunction with Labconco 6, 12, and 18 Liter Freeze Dryers. Refer to your

Freeze Dry System Instruction Manual for directions about adding samples and freeze drying

them.

Installation of Manifold (Refer to Figure 1)

1. Start installing a 1/4" socket head cap screw into the front right hand threaded hole at the

3" vacuum port. Do Not tighten.

2. Slide the flexible coupling onto the round tube on the bottom of the manifold. Do Not

tighten the clamp.

3. Position the manifold over the 3" vacuum port slipping the flexible coupling over the port

and aligning the screw into the slot on the bottom flange.

4. Install the 1/4" screw, lockwasher and flat washer into the left hand rear threaded hole

and tighten. Tighten the screw in the front right hand position by inserting the hex

wrench through the hole in the top of the support housing.

5. Tighten the 2 clamps around the flexible boot.

6. Slip the two tray clips over the tray support.

7. Loosen the 2 knobs on the ends of the manifold. Install the tray support and tighten the

knobs.

8. Install the tray and position the clips to hold it in place.

1 2 3 4 5

Page 1

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 1 of 5 LABCONCO CO

Page 2

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 2 of 5

Page 3

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 3 of 5 Valve Operati

Page 4

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 4 of 5 Notes: Always

Labconco Instruction Sheet 7508800, Rev B, ECO C437 5/04 5 of 5 Warranty- We

No comments

Labconco 10-Port Manifold User Manual